Wintertide Beanie… Free Crochet Pattern!!

Wintertide Beanie… Free Crochet Pattern!!

Wintertide Beanie

If you love this Wintertide Beanie… Save it to your Ravelry Favorites… Click Here!!


To celebrate the last day of Winter… Here is a brand new free crochet pattern~Wintertide Beanie!  If you loved the Wintertide Headband… This beanie is just as easy!! I hope you love this just as much!!

Materials:

Yarn~125 Yards Worsted Weight Yarn ~ I used Red Heart Super Saver in Jade for this project

Hooks~ J & K

Yarn Needle

Decorative Button

Stitches:

Ch –  Chain     St – Stitch     Sk – Skip     Sl St – Slip Stitch     Sc – Single Crochet     Dc – Double Crochet     Bl – Back Loop      Rev Sc – Reverse Single Crochet

Instructions: 

With K Hook ~

Chain 60, join with sl to form ring. Be very careful not to twist chain.

Round 1:  Ch 1, sc around, join with sl st to beginning sc. = 60 sc

Round 2:  Ch 3(counts as dc now and throughout), bldc in each st around, join with sl st to top of beginning ch 3. = 60 dc

Round 3: Ch 1, blsc in each st around, join with sl st in beginning sc. = 60 sc

Round 4-17: Repeat rows 2 & 3

Finish off leaving a long tail to draw top of beanie together.

Using yarn needle, weave tail in and out of every other stitch in top of beanie. Draw tight and secure

Brim:

Using J hook

With right side facing, join yarn with sl st to bottom edge of beanie.

Rounds 1-5:  Ch 1, sc in each st around, join with sl st to beginning. = 60 sc

Round 6:  Ch 1, rev sc around, join with sl st to beginning.

Finish off and weave in ends

Tab:

*Even rows are the right side

Using J hook, ch 5

Row 1:  Sc in 2nd ch from hook and each across. = 4 sc

Rows 2- 12: Ch 1, turn, sc in each across. = 4 sc

Row 13: Ch 1, turn, sc in 1st st, ch 2, skip 2 sts, sc in last st. = 2 sc & ch 2

Row 14:  Ch 1, turn, sc in 1st st, 2 sc in ch2 space, 3sc in last st, 12 sc evenly down side of rows, 3 sc in 1st st of bottom, sc in next 2 sts, 3 sc in next st, 12 sc evenly up side of rows, 2 sc in top corner st, join with sl st to 1st st of row 14. =40 sc

Finish off

Attach button on wrong side of tab at the opposite end of the button-hole(ch 2 sp).

Gathering hat and placement of the tab ~ From the inside of the hat, push button to the right side of  beanie between 2 dc in round 8, bring the button-hole end around the brim of the beanie and button the tab closed.

You can make the hat less or more gathered by placing the button in any dc round.

Congratulations, you have finished your Wintertide Beanie!!!

Happy Crocheting!!

Elena


©Copyright 2017 Elena Hunt/Beatrice Ryan Designs.  All my, patterns and posts are my own work. Do not copy them in any way. If you want to share this information with someone, share the link to this post. If you want to share on your own blog website, then you may use the first photo in this post and link back to this post. You may not give away printed copies of this post. Thank you. This post may contain affiliate links/ads. If you purchase something from a link in this post, I may be compensated.

Snowboarders Slouchy Hat

Snowboarders Slouchy Hat

Snowboarders Slouchy Hat

snowboarders-slouchy-hat-free-crochet-pattern

If you love this project… Add it to your favorites on Ravelry!! Click Here…


Living in snow country where we have a ski resort, My kids love to ski and snowboard once the snow starts flying…  This Snowboarders Slouchy Hat is the perfect hat for them to be seen on the slopes!!  Easy to make,, super quick to work up,, and best of all its a free crochet pattern!!

This awesome slouchy hat is made of 3 simple crochet stitches to create a slightly bee hive effect!!  This is one of my all time favorite designs and a great stocking stuffer for anyone that wants to stay warm!!


Materials

Worsted Weight #4 Yarn ~ Approximately 200-225 yards, Shown here in Caron Jumbo in Seaside Ombre

Hooks ~ C, J, K

Yarn Needle and Scissors

Stitches

St ~ Stitch     Ch ~ Chain     Sl St ~ Slip Stitch     Sc ~ Single Crochet     Hdc ~ Half Double Crochet      FPHdc ~ Front Post Half Double Crochet     Trc ~ Treble Crochet

Gauge

J Hook – FPHdc   8 sts x 10 rows = 2″ x 2″

Size

22 1/2″ around brim unstreatched, 10 1/2″ top to bottom


Instructions

Brim

Using J hook, ch 11

Row 1: Hdc in 3rd ch from hook and each across. = 10 hdc

Row 2: Ch2(counts as hdc now and throughout), turn, FPHdc in next 8 sts, hdc in last st. = 2 hdc 8 FPHdc

Rows 3-74:  Repeat row 2

Finish off, leaving tail for sewing

Sew short ends together to form brim.

Hat- Working in the round

Using C hook, join yarn to top of brim in side of rows

Round 1:  Ch 1, sc 74 sts evenly around the brim in the side of brim rows. = 74 sc

Rounds 2 & 3: Ch 1, sc around. = 74 sts

Change to K hook

Round 4: Ch 4(counts as trc now and throughout), trc in each st around, join with sl st to top of beginning ch 4. = 74 trc

Change to C hook

Rounds 5-7: Ch 1, sc in each st around. 74 sc

Rounds 8-15:  Repeat rounds 4-7

Change to K hook

Round 16: Ch 4,trc in next 5, sk st,  *trc in next 6 sts, sk st*, repeat *to* 9 times, trc in last 4, join with sl st to top of beginning ch 4.=64 trc

Change to C hook

Rounds 17 & 18: Repeat rounds 2 & 3 = 64 sc

Round 19: Ch 1, *sc in next 5 sts, sk st*, repeat *to* 10 times, sc in last 4, join with sl st to beginning. = 54sc

Change to K hook

Round 20: Ch 4, trc in next 3 , sk st, *trc in next 4 sts, sk st*, Repeat *to* 9 times, join to top of beginning ch 4. = 44 trc

Change to J hook

Round 21: Ch 2(counts as hdc), sk st, *hdc in next st, sk st*, repeat *to* around, join to top of beginning ch 2. = 22 hdc

Round 22: Ch 2, sk st, *hdc in next st, sk st*, repeat *to* around, join to top of beginning ch 2. = 11 hdc

Finish off leaving tail for sewing.

Using yarn needle weave in and out of each st and draw tight. Finish off and weave in ends.

Finishing

Using J hook, join yarn at bottom edge of brim with sl st, ch 1, sc 65 sts evenly around.

 


Congratulations!!  You now have a Snowboarders Slouchy Hat…  

Make sure to share your finished project on my Facebook Page!!

Happy Crocheting!!

Elena

charliesnowboarders-slouch-hat


©Copyright 2016 Elena Hunt/Beatrice Ryan Designs.  All my, patterns and posts are my own work. Do not copy them in any way. If you want to share this information with someone, share the link to this post. If you want to share on your own blog website, then you may use the first photo in this post and link back to this post. You may not give away printed copies of this post. Thank you. This post may contain affiliate links/ads. If you purchase something from a link in this post, I may be compensated.


 

Steel Ridge Beanie… Free Crochet Pattern!!

Steel Ridge Beanie… Free Crochet Pattern!!

Steel Ridge Beanie

steele-ridge-beanie-free-crochet-pattern

If you love the Steel Ridge Beanie… Save it to your Ravelry favorites!!  Click Here….


Steel Ridge Beanie is a fun easy shell and chain pattern beanie… Pick 2 of your favorite colors and make one today!! Perfect for a cool afternoon or chilly evening.

Materials:

200 yards  total ~ 2 Colors of Lion Brand Yarn Heartland Worsted Weight Yarn. Shown here in Great Smokey Mountains and Glacier Bay

K Hook

Scissors

Pom Pom Maker

Stitches:

St ~ Stitch      Ch ~ Chain      Sl St ~ Slip Stitch     Sk ~ Skip     Sc ~ Single Crochet     Hdc ~ Half Double Crochet      Dc ~ Double Crochet      FP ~ Front Post      BP ~ Back Post

Gauge:

6 dc x 3 rows

Hat Size:

22″ around un-stretched 11″ tall(not including pom pom)

Tips:

*You will be working in the round

*Use even, slightly loose tension

*Using a darker color and a lighter color will show off the pattern

*It is easiest to carry your yarn up each round as you change color


Instructions:

Color A ~ Great Smokey Mountain   Color B ~ Glacier Bay

Using Color A Chain 61

Round 1:  Sc in 2nd ch from hook and each across. =60 sc

Carefully join with out twisting, you will secure the project when you make the brim

Round 2:  Ch 1, sc in same st, sk 2 sts, 5dc(shell) in next st, sk 2 sts, *sc in next st, sk 2 sts, 5dc in next st, sk 2 sts*, repeat *to* around, Join with sl st to beginning. = 10 5dc shells & 10 sc

Change to Color B

Round 3:  Join yarn in same sc as joining last round. Ch 1, sc in same st, *ch 6, sk 5dc shell, sc in next sc*, repeat *to* around, join with sl st to beginning sc. = 10 ch6 & 10 sc

Change to Color A

Round 4:  Join yarn in same st as joining last round.  Ch 3(counts as dc now and through out), 4 dc in same st, * sc around ch6 from previous round and into 3rd dc of 5dc shell in round below(see picture at bottom), 5dc shell in next sc*, repeat *to*  around, sc around last ch6 into the 3rd dc of 5dc shell. Join to top of beginning ch 3. = 10 5dc shells & 10 sc

Rounds 5-26:  Repeat rounds 3 & 4

Finish off leaving long tail for securing top of beanie.

Weave tail in and out of each middle dc of 5dc shells. Draw closed and secure.

Crochet with Me Week 4 Stitches

Brim

Join Color A in any st of bottom of beanie

Round 1:  Sc 60 sts evenly around the bottom of the beanie. Join with sl st to beginning sc

Round 2:  Ch 2(counts as hdc now and throughout), hdc in each st around. Join with sl st around the top of beginning ch 2. = 60 hdc

Round 3-5:  Ch 2, bphdc around next st,* fphdc around next st, bphdc around next st*, repeat *to* around. Join around top of beginning ch 2.

Finish off and weave in ends.

*Optional* Make a Pom Pom and secure it to the top of your new Steel Ridge Beanie


Congratulations, You now have a Steel Ridge Beanie… Make sure to share you pictures on Instagram, Facebook and Pinterest!!

Happy Crocheting!!

Elena


©Copyright 2016 Elena Hunt/Beatrice Ryan Designs.  All my, patterns and posts are my own work. Do not copy them in any way. If you want to share this information with someone, share the link to this post. If you want to share on your own blog website, then you may use the first photo in this post and link back to this post. You may not give away printed copies of this post. Thank you. This post may contain affiliate links/ads. If you purchase something from a link in this post, I may be compensated.


 

%d bloggers like this: